Certeza HP-240 Heating Pad

Specifications

• Size: 30 × 60 cm
• Material: PVC
• Power Supply: 220V / 50Hz
• Current: 10A
• Rated Power: 100W
• Working Temperature: 30°C – 65°C
• Heating Coil Temperature: 75°C ± 5°C
• Heat Protection: Included
• Consistent heat for optimal therapy
• Adjustable heat settings to control your therapy
• Moist heat therapy for deep penetrating relief
• Overheat protection
• Soft, plush, washable cover.
• Longer reach 8 feet cord

Uses:

• Relaxes muscles and relieves joint pain and soreness
• Increases blood flow to the injury area and helps accelerate healing
• Warms and loosens stiff muscles before exercise
• Arthritis pain relief
• Menstrual pain relief

IMPORTANT INSTRUCTIONS

Read Before Use

1. Do Not Insert Pins
   Warning: Risk of injury or health hazards.
2. Do Not Use Folded.
3. Not Suitable for Very Young Children (0-3 years).

HOW TO USE YOUR HEATING PAD

1. Lay the cloth cover on a flat surface. Open the velcro closure of the cover.
2. Insert the heating pad completely into the cover. Ensure the cord and control remain outside the cover.
3. Flatten the pad inside the cover so it fills the entire space. Close the velcro securely.
4. Plug the cord into any 220-volt AC electrical outlet. Set the control to the desired heat level.

⚠️ WARNING: Never use the heating pad without the cloth cover.

USING THE MOIST HEAT OPTION (FOR SELECT MODELS)

1. Soak the included sponge under warm water until thoroughly saturated.
2. Gently wring out excess water.
3. Place the sponge on top of the heating pad and insert both into the cloth cover. Snap the cover closed.

⚠️ DANGER: Do not immerse the pad in water or place it under running water. Failure to comply may result in personal injury.

FABRIC COVER WASHING INSTRUCTIONS

1. Disconnect the heating pad from the electrical outlet.
2. Remove the cover from the pad.
3. Machine or hand wash the cover using a mild detergent and cool water only.
4. Hang the cover to dry or machine dry on a gentle, cool cycle.

TROUBLESHOOTING

• No Heat:
  • Ensure the unit is unplugged from the wall outlet.
  • Verify there is no physical damage to the cord, controller, or pad.
  • Confirm the AC outlet is functional.
  • Restart the unit by turning the control to the “Off” position, then back to the desired heat level.
• No Power:
  • Ensure the pad is not folded or bunched in any area.
• Control Shuts Off:
  • This unit has overheat protection.
  • Wait for the unit to cool down, then restart by setting the controller to the desired heat level.
• Pad Doesn’t Get Hot Enough:
  • Ensure the pad is flat, with no folds or bunches.
  • Restart the unit by turning the controller to the “Off” position, then back to the desired heat level.